Key takeaways
- E20LB-FG300, FG600 and FG900 each occur in two configuration rows. Matching the model, length, wattage and DC48V does not preserve the LED brand, finish or listed colour-temperature options.
- The current standard rows list SANAN, black and 3000K / 4000K. The CCT-labelled rows list bridgelux, black/white and 3000K / 4000K / 6000K.
- The 450 mm and 1200 mm lengths are listed only among the CCT-labelled rows. The 1200 mm model identifier is E10201200.
- The CCT label does not confirm tunable-white operation or a control protocol. Keep the selected configuration link and requested attributes together.
The same FG model can lead to a different selection
Choose an E20 FG magnetic linear light by its complete configuration, not just its model, length or wattage. Lumseq currently lists both a standard and a CCT-labelled E20LB-FG600 at 600 mm, 20 W and DC48V, but the LED brand, finish choices and listed colour temperatures differ. A quotation that says only “FG600, 20 W” leaves those differences unresolved.
The practical decision is which source row meets the required attributes. A white housing or a listed 6000K option points to a CCT-labelled row in this catalog; a requirement for SANAN points to a standard row. These are selection boundaries in the current listing, not evidence that every option can be combined or that either row supports a particular control system.
Existing Lumseq AI design illustration showing E20LB-FG300. Product, room-scene and detail panels illustrate appearance; they do not identify the CCT-labelled or standard configuration, control protocol, track compatibility or measured lighting performance. Full original poster retained.
Read the eight rows without merging their options
The table reproduces the current listing. All eight rows list a 22 mm width, 25 mm height, DC48V input, die-cast aluminium, a 100° beam and CRI >90. These are catalog values, not independent measurements. Shared values do not make the rows interchangeable.
Finish and colour-temperature cells describe options listed for that row. They are not separate confirmed SKUs or a promise that every finish–temperature combination is available. In particular, preserve E10201200 as the published identifier for the 1200 mm row; do not turn it into an assumed FG1200 model.
| Listed model | Configuration | Length / power | LED brand | Finish options | Listed colour temperatures |
|---|---|---|---|---|---|
| E20LB-FG300 | CCT-labelled | 300 mm / 10 W | bridgelux | black/white | 3000K / 4000K / 6000K |
| E20LB-FG450 | CCT-labelled | 450 mm / 15 W | bridgelux | black/white | 3000K / 4000K / 6000K |
| E20LB-FG600 | CCT-labelled | 600 mm / 20 W | bridgelux | black/white | 3000K / 4000K / 6000K |
| E20LB-FG900 | CCT-labelled | 900 mm / 30 W | bridgelux | black/white | 3000K / 4000K / 6000K |
| E10201200 | CCT-labelled | 1200 mm / 40 W | bridgelux | black/white | 3000K / 4000K / 6000K |
| E20LB-FG300 | Standard | 300 mm / 10 W | SANAN | black | 3000K / 4000K |
| E20LB-FG600 | Standard | 600 mm / 20 W | SANAN | black | 3000K / 4000K |
| E20LB-FG900 | Standard | 900 mm / 30 W | SANAN | black | 3000K / 4000K |
Choose by the attribute that rules an option in or out
For a white 600 mm module with a requested 4000K option, the CCT-labelled E20LB-FG600 is the row to enquire about: it lists bridgelux, black/white, 600 mm and 20 W. The standard E20LB-FG600 lists black only, so it does not satisfy that white-housing requirement as currently documented. Ask the quotation to confirm the requested white/4000K combination and how that colour temperature is supplied.
For a black 600 mm, 20 W module where the accepted LED brand is SANAN and the requested colour temperature is 4000K, select the standard E20LB-FG600 row. A CCT-labelled FG600 with bridgelux keeps the same model and power but changes a specified attribute. Treat it as a proposed alternative requiring review, rather than approving it from the FG600 name alone.
A 450 mm / 15 W or 1200 mm / 40 W requirement has no standard-row match in this listing. The available starting points are the CCT-labelled E20LB-FG450 and E10201200 respectively. Likewise, 6000K is listed only for the CCT-labelled rows. If another attribute conflicts, do not construct an unlisted standard version by copying options across rows.
Keep colour-temperature options separate from control capability
CCT means correlated colour temperature, expressed here in kelvin. The catalog label “CCT” and a list of 3000K / 4000K / 6000K do not establish whether those are order-time choices, switched settings or an adjustable range. The current CCT configuration explicitly leaves its control protocol unconfirmed; the standard rows do not specify a dimming protocol.
Do not describe either configuration as Bluetooth, Zigbee, DALI or continuously tunable white without configuration-specific confirmation. If adjustable colour temperature or dimming is required, obtain the exact offered control arrangement before accepting the row. Similarly, DC48V identifies the listed input voltage; it does not establish mechanical, electrical or control compatibility with another track system.
Write the chosen row into the enquiry
Use the configuration link as a locator, then put the required attributes in the quotation text. A link alone is not a permanent supply specification: retain the accepted description with the quotation and review any later alternative against it. The following are enquiry examples, not confirmed offers.
White-housing example: “Please quote the CCT-labelled E20LB-FG600, configuration jyv-1033e3651a0f, listed L600 × W22 × H25 mm, 20 W, DC48V, bridgelux. Required finish: white; required colour temperature: 4000K; quantity: [enter quantity]. Please confirm that combination, how the colour temperature is supplied and the exact control arrangement. Track system: [identify the proposed system].”
SANAN example: “Please quote the standard E20LB-FG600, configuration jyv-03db8ce9d865, listed L600 × W22 × H25 mm, 20 W, DC48V, SANAN, black. Required colour temperature: 4000K; quantity: [enter quantity]. Please identify any offered departure from this configuration, and confirm the control arrangement and compatibility with [identify track system].”
Send Lumseq the chosen row, required attributes, quantity, destination market and track/control requirements. The catalog is enough to identify these enquiry candidates; availability, pricing, lead time and final system acceptance still require an actual offer and review.
Frequently asked questions
Questions buyers ask
Can I use the E20LB-FG300 poster to identify the standard or CCT-labelled row?
No. The existing AI design illustration identifies the shown model as E20LB-FG300, but not its standard or CCT-labelled configuration. It cannot establish the LED brand inside, colour-temperature behaviour or control protocol. Select those attributes from the configuration row and obtain an exact offered description.
Is the website configuration ID enough for a repeat order?
Use it to locate the selected row, but retain the accepted model, dimensions, power, LED brand, finish, colour temperature and control description with the quotation or order. Recheck the current offer against that record; a locator alone does not approve a changed configuration.
Sources and references
Lumseq E20 FG 48V Diffused Magnetic Linear Light — current configurationsLumseq public product catalog — E20 FG familyTalk to the product team
Planning an OEM or commercial lighting order?
Send your application, specification and destination market. We will help narrow the product and sample options.
Discuss on WhatsApp