Lumseq logoLumseq
Lighting Journal

Product knowledge

8024-W Wall Light Sizes: Select for a Measured Wall Space

Use the five listed 8024-W body sizes to screen a measured wall space, distinguish a dimensional shortlist from installation approval, and specify the exact option for quotation.

8024-W Wall Light Sizes: Select for a Measured Wall Space

Key takeaways

  • The listed 8024-W heights are 430, 600, 800, 1000 and 1200 mm; the -40 model is listed at 430 mm, not 400 mm.
  • A body smaller than the measured space is a preliminary candidate. It still needs mounting, installed-envelope and service-access review.
  • Keep the complete model and W × H × D on the room schedule. The AI product-family visualization shows 8024-W-40, not every listed size.
  • The source contains conflicting statements about light-source inclusion; obtain an explicit supply description for the quoted option.

Start with the available wall space, then shortlist the model

Use the listed 8024-W body dimensions to eliminate options larger than the measured wall space, then review the remaining models for installation and supply. This gives a preliminary dimensional shortlist, not approval to install. In particular, 8024-W-40 is listed at 430 mm high: reading its suffix as 400 mm would introduce a 30 mm error before mounting details are considered.

Record the usable vertical extent, width and permitted projection at each wall position. Locate surrounding joinery, mirrors, doors and other obstructions, and identify the proposed cable exit. A finished wall elevation is more useful than a room name alone. Do not derive a universal mounting height or a room-size recommendation from this product list.

AI product-family visualization showing 8024-W-40 (solid alabaster). Room scenes and detail panels are illustrations, not real installation photographs, material tests or separate images of every listed size. The full poster retains its AI disclosure.

Read the five complete sizes rather than the model suffix

Lumseq's current 8024-W product page lists the following five configurations. Width, height and depth are shown in millimetres; retain the full model name and dimension order when transferring a row into a schedule. The source lists Copper + alabaster and Natural copper for this family. Those entries describe the listing, not a separate finish sample or installation test.

All five rows have the same listed 120 mm width and 100 mm depth. Choosing a shorter height therefore does not solve a width or projection conflict. These are listed product dimensions; a mounting drawing is still needed to establish the complete installed envelope.

Listed model (solid alabaster)Width × height × depthHeight used for screening
8024-W-40120 × 430 × 100 mm430 mm
8024-W-60120 × 600 × 100 mm600 mm
8024-W-80120 × 800 × 100 mm800 mm
8024-W-100120 × 1000 × 100 mm1000 mm
8024-W-120120 × 1200 × 100 mm1200 mm

Worked example: a 750 mm vertical envelope

Assume, only for this example, that a measured wall position allows a maximum vertical envelope of 750 mm. Subtracting each listed body height gives the screening results below. No real project or recommended clearance is implied.

The 800, 1000 and 1200 mm bodies already exceed that vertical envelope and can be excluded for this position. The 430 and 600 mm bodies remain candidates for further review. Their 320 and 150 mm differences are total unallocated vertical space, not approved top-and-bottom clearances and not evidence that a backplate, connection or service operation will fit.

Next check the listed 120 mm width and 100 mm depth against the wall elevation and permitted projection. Have the responsible reviewer confirm the full installed dimensions, attachment and access requirements. If either dimension fails, reducing height alone will not make the option suitable.

Listed body height750 mm minus body heightHeight-only decision
430 mm320 mmKeep for installation review
600 mm150 mmKeep for installation review
800 mm−50 mmExclude for this example
1000 mm−250 mmExclude for this example
1200 mm−450 mmExclude for this example

Choose between the remaining candidates on purpose

If both 430 and 600 mm options survive the dimensional review, height alone does not select the better one. Compare their intended appearance on the wall elevation and obtain the exact mounting information. Use a correctly identified sample where appearance matters; the AI product-family visualization shows 8024-W-40 (solid alabaster), not five individually verified sizes. Its room scenes and detail panels are illustrations, not real installation photographs or material tests.

This listing does not establish the light output, distribution or illuminance needed at the position. A taller body cannot be assumed to provide more useful light. Where the wall light has a defined lighting task, ask which model-specific lighting information is available and have the designer assess the task separately from the body-size choice.

Keep a replacement tied to the wall position. In the 750 mm example, substituting -80 for -60 fails the height screen; substituting -40 reduces the listed body height but changes the selected appearance and may change installation details. Recheck the accepted configuration rather than approving a substitution from a matching family name.

Turn the shortlist into a quotation line

For each wall reference, record the chosen complete model, listed W × H × D, measured constraints and required quantity. Ask the quotation to identify the actual supplied configuration and reference the drawing or other information used to accept it. Keep an unresolved field visible until a definite supplier response is received.

Example enquiry wording: "Wall reference A: please quote 8024-W-60 (solid alabaster), listed W120 × H600 × D100 mm, Copper + alabaster, Natural copper, quantity [enter quantity]. The measured vertical envelope is 750 mm. Please provide the complete installed dimensions and mounting details, and state the exact light source and components included. Final selection remains subject to review of those details." This is an enquiry example, not an approved specification.

There is a specific supply ambiguity to resolve: the current source field is headed "Light source (not included)", while its value mentions an included bulb and a default three-colour option. Do not decide inclusion from either phrase in isolation. Obtain a written description of the exact light source, electrical requirements and supplied components for the offered model; do not infer a switching method or dimming capability.

Send Lumseq the wall references or elevation, selected models and quantities, destination market and required supply details. Once the configuration is accepted, carry that same description into the purchase order so that a later substitution can be reviewed against the original wall position.

Frequently asked questions

Questions buyers ask

Does 8024-W-40 mean that the wall light is 400 mm high?

No. The current listing gives 8024-W-40 a body size of W120 × H430 × D100 mm. Use the complete listed dimensions and confirm the offered configuration rather than deriving dimensions from the suffix.

Can an 8024-W size be approved from the product picture alone?

No. The AI product-family visualization shows 8024-W-40 (solid alabaster), not every listed size. Its room scenes and detail panels are illustrations, not real installation photographs or material tests. Select from the exact configuration dimensions, then review the complete installed envelope, mounting details and supplied light source for that model.

Sources and references

Lumseq: Wall lamp 8024-W — current configurationsLumseq public product catalog

Talk to the product team

Planning an OEM or commercial lighting order?

Send your application, specification and destination market. We will help narrow the product and sample options.

Discuss on WhatsApp